Extruded polystyrene foam board for thermal insulation

PNP 200 MG

PNP 200 MG is a high-performance thermal insulation material (latest generation XPS) manufactured from general-purpose polystyrene

Product desription

A special type of boards designed for use under plaster or tile finish. The boards have a milled rough surface with grooves, which improves the adhesion of plaster and adhesive compounds to the material surface.

Application

SM EN 13164:2014+A1:2016 (EN 13164:2012+A1:2015)

Specifications / standards

Based on our current knowledge, this product does not contain: - substances restricted under REACH (Annex XVII of the Regulation); - substances of very high concern (SVHC) as listed in Authorisation List (Annex XIV of the REACH regulation), especially HBCDD — hexabromocyclododecane — brominated flame retardant with high ecotoxicity; - substance listed in the Candidate List of SVHC for authorisation, published by the European Chemicals Agency in concentration above 0,1% (w/w). During the production of thermal insulation materials PNP no ozone-depleting blowing agents are used.

Reach Information

Key features / Advantages

Cars and other vehicles intended for the transport of PNP 200 MG boards must be free of dirt and debris, as well as free of objects that may interfere with loading. The floor must be level and free from damage. The sides must be strong enough to prevent lateral tilting and shifting of the load while driving. The vehicle intended for loading the PNP 200 MG boards must not have any protrusions longer than 5 cm, which could damage the load in direct contact with it.

Transporting

PNP 200 MG boards should be stored indoors, at least one meter away from sources of fire and high temperatures. It is allowed to store outdoors in a plastic wrap that protects the boards from ultraviolet rays, or under a canopy. For outdoor or sheltered storage, the boards should be stacked on pallets. The heig

Storage

Compressive strength or Compressive stress at
10% deformation, kPa

Reaction to fire, class

Declared thermal conductivity λD , W/m·K (20-100 mm)

Declared thermal conductivity λD , W/m·K (120-150 mm)

Long term water absorption, WL(T)

Dimensional tolerances, class

Operating temperature, о С

Declared thermal resistance RD , m2 ·K/W (20 mm)

Declared thermal resistance RD , m2 ·K/W (30 mm)

Declared thermal resistance RD , m2 ·K/W (40 mm)

Declared thermal resistance RD , m2 ·K/W (50 mm)

Declared thermal resistance RD , m2 ·K/W (60 mm)

Declared thermal resistance RD , m2 ·K/W (80 mm)

Declared thermal resistance RD , m2 ·K/W (100 mm)

Declared thermal resistance RD , m2 ·K/W (120 mm)

Declared thermal resistance RD , m2 ·K/W (150 mm)

Surface type

Edge type

Technical characteristics

200

F

0,034

0,035

≤3.0 (Vol-%)

T1

-70.....+75

0,55

0,85

1,15

1,45

1,75

2,35

2,90

3,40

4,25

milled and grooved

Straight edge (С)/
L-shaped edge (T-15)

TDS № OT 2006MG version 02.05.2022

Package

Nominal thickness,
mm

Length, mm

Width, mm

Quantity of boards per pack, pcs

Pack
volume,
m³

Pack
size,
m²

20

30

40

50

60

80

100

120

150

585

1185

20

13

10

8

7

5

4

3

2

13.86

9.01

6.93

5.55

4.85

3.47

2.77

2.08

1.9

0.2780

0.2074

0.2770

0.2776

0.2912

0.2775

0.2772

0.2496

0.2080

The central office of ORANGE TOWER S.R.L. in Ungheni Moldova
Address: Republic of Moldova, Ungheni, st. A. Bernardazzi, 19

Phone:
E-mail: sales@pnpinsulation.com

Contacts

To get advice on the purchase of PNP products, receive technical advice and order training programs:

+373 (236) 80005

Please leave your contacts and we will get back to you as soon as possible